PELATIHAN TROUBLESHOOTING, MAINTENANCE & PROTECTION OF AC ELECTRICAL MOTORS & DRIVES

TRAINING TROUBLESHOOTING, MAINTENANCE & PROTECTION OF AC ELECTRICAL MOTORS & DRIVES

YOU WILL LEARN HOW TO:
    Understand AC motor operation and construction
    Specify, select and install motors
    Specify protection requirements for motors
    Specify speed control requirements for motors
    Install and commission motors
    Fix faults on motors
    Interpret motor performance curves
    Interface control circuits of motors with PLCs/DCSs
    Reduce downtime on electrical motors
    Improve plant safety
    Improve plant throughput
    Reduce spares usage and requirements

PESERTA PELATIHAN
    Plant Engineers
    Instrument Technicians
    Operations Personnel
    Electrical Maintenance Technicians & Supervisors
    Instrument and Control Engineers
    Process Control Engineers
    Mechanical Engineers
    Service Technicians
    Maintenance Personnel

THE WORKSHOP TROUBLESHOOTING, MAINTENANCE & PROTECTION OF AC ELECTRICAL MOTORS & DRIVES

It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors. You will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life.
You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling and process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the course gives you the fundamental tools in troubleshooting motors confidently and effectively.

THE PROGRAM TROUBLESHOOTING, MAINTENANCE & PROTECTION OF AC ELECTRICAL MOTORS & DRIVES

INTRODUCTION AND OUTLINE OF WORKSHOP OBJECTIVES
FUNDAMENTALS OF MOTOR TECHNOLOGY
• Basic principles of rotating electric machines
• Fundamental principles of speed control
• Efficiency, torque, inertia, horsepower/power factor
• Torque-speed curves
• How the motor produces torque
• Types of motors
AC MOTOR THEORY, CONSTRUCTION AND MAINTENANCE
• Basic construction and physical configuration, windings
• Principles of operation and performance
THREE PHASE AC INDUCTION MOTORS
• Components
• Theory of operation
• Induction motor design
• Duty cycles
• Insulation and Cooling requirements
• Starting methods
• Selecting motors
• Maintenance of AC machines
• Types of faults, fault finding and testing of AC machines
• Testing instrumentation
PROTECTION OF AC MOTORS
• Protective devices
– Thermal Overload
– Over Current / Overload
– Under-voltage / Over-voltage
– Under frequency
– Current unbalance or negative phase sequence
– Earth fault protection
– Pole slip / Out of step
– Loss of excitation
– Over fluxing
– Stall protection / acceleration time / Start up supervision (Time between starts / Starts per hour)
– Voltage controlled or restrained over current
• Protection settings
SPEED CONTROL OF AC MOTORS
• Introduction to Variable Speed Drives or Power Electronic Converters
• Types, and Designs of Variable Speed Drives
PROTECTION OF AC CONVERTORS AND MOTORS
• Frequency converter protection circuits
• Protection settings
CONTROL SYSTEMS FOR AC VARIABLE SPEED DRIVES
• Control theory of VSDs explained
THE SELECTION OF AC CONVERTORS FOR VARIABLE SPEED DRIVE APPLICATIONS
• Selection procedure
• Nature of the load
• Selection of correct size motor and converter
INSTALLATION AND COMMISSIONING OF AC VARIABLE SPEED DRIVES
• General Installation and environmental requirements
• Electrical connections and Earthing requirements
• Control wiring and pre-commissioning
• Commissioning tests
NEW TECHNOLOGIES AND DEVELOPMENTS

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

• Presentasi
• Diskusi antar peserta
• Studi kasus
• Simulasi
• Evaluasi
• Konsultasi dengan instruktur

 

Jadwal Training Terbaru di Jogja Tahun 2025

Januari : 14-15 Januari 2025
Februari : 11-12 Februari 2025
Maret : 11-12 Maret 2025
April : 8-9 April 2025
Mei : 21-22 Mei 2025
Juni : 17-18 Juni 2025
Juli : 15-16 Juli 2025
Agustus : 26-27 Agustus 2025
September : 17-18 September 2025
Oktober : 14-15 Oktober 2025
November : 11-12 November 2025
Desember : 17-18 Desember 2025

Jadwal tersebut juga dapat disesuaikan dengan kebutuhan calon peserta

 

 

Lokasi Pelatihan pusattraining.com :

• Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
• Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

 

Investasi Pelatihan tahun 2023 ini :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di pusat training untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan .
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

 

Pendaftaran Training

Tingkatkan keterampilan untuk mendukung karier Anda sekarang! Segera daftar untuk pelatihan unggulan di PT Pusat Training Indonesia. Jangan lewatkan kesempatan untuk mengembangkan diri Anda dan menjadi ahli di bidang Anda. Daftar sekarang dan raih sukses bersama kami hubungi Marketing Pusat Training Indonesia melalui WA  081218600928