Pelatihan Pipeline Technology
Training Pipeline Technology
Description of Pipeline Technology Training
This special practical approach course is designed to provide a comprehensive understanding of applied piping and pipeline technology: design aspects of piping & pipeline system, selection of materials and types of pipes, flanges, valves and fittings, handling of those materials, welding & installation techniques and procedures, and the operation, inspection and maintenance of oil & gas piping and pipeline systems
OBJECTIVES
Better understand the description, classification, requirement and specification of pipes, flanges, valves and fittings used for oil and gas transportation operation
Improve ability on design, installation and maintenance
Interpret and evaluate pipeline operation performance data
Identify and solve problems in oil and gas transportation pipeline
Course Content Pipeline Technology Training
1. Introduction
– History of Pipeline Technology
– ASME Codes and Standards
– API Standards
– NACA, MSS-SP, PFI Standards
– Fundamentals of Maintenance and Integrity
2. Oil & Gas Flow Stream Characteristics, Equipment and Facilities
– Hydrocarbon Properties and Oil & Gas Fluid Flow Characteristics
– Multi-phase Flow Gathering Lines, Manifolds and Accessory Equipment
– Oil & Gas Separation Stations and Facilities
– Water Treating and Disposal Equipment, Transportation Lines & Facilities
– Gas Treating and Processing Equipment, Transmission Lines & Facilities
3. Piping & Pipeline Materials, Standards and Codes
– Steel Materials for Piping & Pipeline
– Metallic Materials for Valves, Flanges and Fittings
– Piping Manufacturing Methods and Variation ofProducts
– Oil & Gas Pipeline Related Standards and Codes
– API 5L Line Pipe Specifications
4. Pipeline Operation Principles
-Piping & Pipeline Layout, Topography and Configuration
-Principles of Fluid Flow and Practical Flow Equation
-Multi-phase and Single-phase Oil & Gas Transportation/Transmission Practice
-Pump Operation in Oil and Water Pipeline system
-Compressor Operation in Gas Pipeline system
4. ANSI B.31 Series Standards and Requirements
– Preliminary Selection of Economic Diameter for Minimum Investment
– Stress Formula for Wall Thickness and Design Pressure Computation
– Pipeline Economics Computation Methods
– Oil or Water Transportation Pipeline Design Concept
– Gas Transmission Pipeline Design Concept
6. Pipeline Construction and Installation
– Choice of Design Procedure
– Stress Computation Methods in Design and Construction
– Pipeline Concrete Coating Parameters
– Hydrostatic Testing Requirements
– Construction/Installation Material Requirements
7. Pipeline Maintenance and Pigging Operation
– Potential Operating Problems and Maintenance of Pipeline Systems
– Inspection Techniques for Potential Failures and Wall Thickness & MAWP Reduction
– Pipeline Cleaning and Pigging Operations
– Pipeline Internal Maintenance and Chemical Injection
– Pipeline External Maintenance and the Cathodic Protection
8. Access Fittings for Maintenance, Chemical Injection and Monitoring
– Access Fitting Specifications, Configurations and Materials
– Chemical Injection, Fluid Sampling and Monitoring Equipment & Facilities
– Chemical Inhibitor, Scale Inhibitor and Biocide Materials
– On-line Corrosion and Scale Monitoring Techniques
– NACE Standards and Computation Methods for Pipeline Monitoring
Peserta
Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.
Instruktur
Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.
Metode Training
- Presentasi
- Diskusi antar peserta
- Studi kasus
- Simulasi
- Evaluasi
- Konsultasi dengan instruktur
Jadwal pusattraining.com tahun 2024 :
Bacth 1 : 16 -17 Januari 2024
Bacth 2 : 13 – 14 Februari 2024
Bacth 3 : 5 – 6 Maret 2024
Bacth 4 : 24 – 25 April 2024
Bacth 5 : 21 – 22 Mei 2024
Bacth 6 : 11 – 12 Juni 2024
Bacth 7 : 16 – 17 Juli 2024
Bacth 8 : 20 – 21 Agustus 2024
Bacth 9 : 17 – 18 September 2024
Bacth 10 : 8 – 9 Oktober 2024
Bacth 11 : 12 – 13 November 2024
Bacth 12 : 17 – 18 Desember 2024
Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan pusattraining.com :
- Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
- Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
- Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
- Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
- Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
Investasi Pelatihan tahun 2023 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di pusat training untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Transportasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.
Pendaftaran Training
Tingkatkan keterampilan untuk mendukung karier Anda sekarang! Segera daftar untuk pelatihan unggulan di PT Pusat Training Indonesia. Jangan lewatkan kesempatan untuk mengembangkan diri Anda dan menjadi ahli di bidang Anda. Daftar sekarang dan raih sukses bersama kami hubungi Marketing Pusat Training Indonesia melalui WA 081218600928
