PELATIHAN FURNACES: OPERATION AND OPTIMIZATION IN SAFETY

FURNACES: OPERATION AND OPTIMIZATION IN SAFETY TRAINING

OBJECTIVES PELATIHAN FURNACES: OPERATION AND OPTIMIZATION IN SAFETY

To provide in-depth knowledge of furnace operation in the petroleum and petrochemical industries. The course places special emphasis on abnormal situations liable to lead to incidents and therefore addresses questions of safety arising from furnace operation. On completion of the course, the participants: have a better knowledge of industrial furnaces technology, operating conditions and constraints, and their signification; manage on stream operation rules in safety; know the main maximum operating values and material operating limits; have mastered these constraints for an optimal furnace.

COURSE CONTENT PELATIHAN FURNACES: OPERATION AND OPTIMIZATION IN SAFETY

1.    FURNACE CONSTRUCTION AND OPERATING CONDITIONS
Different types of furnaces and their functions. Operating conditions. Distribution of heat supplied. Furnace efficiency. Estimation rule parameters governing furnace efficiency, scope and limitations for improving furnace efficiency. Construction of heat exchange areas, insulation, refractory materials: technology, type of materials used.
2.    FLUE GAS CIRCULATION
Natural draft: stack role, pressure profile inside a furnace. Parameters governing draft and negative pressure control. Forced draft: draft fan role. Draft control.
3.    COMBUSTION – FUEL – BURNERS
Combustion conditions: heating value, liquid and gas fuel characteristics, liquid spray. Implementation of combustion: introduction of fuel and air, achieving their mixture, burner operation. Combustion quality: analysis of the oxygen and the unburned material in the flue gases, control of the combustion air flow rate, air-fuel constraints. Combustion safety: flame detection, control and safety devices on the fuel circuits. Combustion constraints and burner operation limits.
4.    HEATING
Heat transfer to the tube bundle: heat flux, tube temperatures, fouling effects. Parameters governing heat transfer: flue gas temperature and mass flow-fuel emissivity. Division of the heated fluid into several passes: control and regulation of the division, low flow rate safety systems. Heating control: flow constraints of the fuel at outlet temperature.
5.    FURNACE OPERATION
On-stream furnace operations: monitoring of combustion and heating – Modifying operating conditions – Analysis of disturbances – Stack sweeping. Startup and shutdown: preparation, safe ignition procedures, ignition after a short shutdown, normal shutdown, emergency shutdown. Incidents: explosive atmosphere in the combustion chamber, tube rupture, unbalancing, etc.

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

• Presentasi
• Diskusi antar peserta
• Studi kasus
• Simulasi
• Evaluasi
• Konsultasi dengan instruktur

Jadwal pusattraining.com tahun 2023 :

• Batch 1 : 24 – 26 Januari 2023
• Batch 2 : 14 – 16 Februari 2023
• Batch 3 : 20 – 23 Maret 2023
• Batch 4 : 4 – 6 April 2023
• Batch 5 : 15 – 17 Mei 2023
• Batch 6 : 26 – 28 Juni 2023
• Batch 7 : 17 – 19 Juli 2023
• Batch 8 : 14 – 16 Agustus 2023
• Batch 9 : 25 – 27 September 2023
• Batch 10 : 10 – 12 Oktober 2023
  

  Batch 11 : 7 – 9 November 2023

  
  

  Batch 12 : 5 – 7 Desember 2023

• Batch 11 : 7 – 9 November 2023
• Batch 12 : 5 – 7 Desember 2023

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan pusattraining.com :

• Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
• Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2023 ini :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di pusat training untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan .
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running