Pelatihan Electrical Grounding and Shielding Electronic Systems

Bypusattra310

Pelatihan Electrical Grounding and Shielding Electronic Systems

Training Electrical Grounding and Shielding Electronic Systems

Training-Electrical-Grounding-and-Shielding-Electronic-Systems-300x176 Pelatihan Electrical Grounding and Shielding Electronic Systems

Course Description Electrical Grounding and Shielding Electronic Systems

This course stresses the fundamental electromagnetic compatibility principles involved in typical grounding and shielding problems. Understanding the objectives and techniques for grounding and shielding will reduce misconceptions and allow a more systematic approach to replace trial and error methods. For example, the course explains why a signal ground is not the same as a signal return.

Also, solutions for the numerous problems caused by wiring inductance are described and demonstrated. The course emphasizes the development of logical diagnostic techniques for identifying various types of noise problems. Often, the correct identification of the problem is more difficult than the solution. The course is at an introductory level; however, some knowledge of electronic circuits and system design is assumed. Several interference mechanisms and shielding techniques are demonstrated.

Course Objectives:

This course is designed to enable participants to:

  • Define electrical ground, signal ground, and signal return
  • Describe various grounding techniques
  • Diagnose noise problems
  • Identify methods to reduce and filter noise
  • Define inductive and capacitive shielding
  • Describe techniques for reducing electromagnetic coupling
  • Select appropriate cabling
  • Identify methods to ensure impedance matching
  • Identify noise coupling mechanisms

Course Outline Electrical Grounding and Shielding Electronic Systems

I. Basic Principles of Noise Reduction

  1. Importance of wiring inductance
  2. Bandwidth of pulse waveforms
  3. Noise coupling mechanisms
  4. How to identify the mechanism
  5. Common and differential modes

II. Grounding: Why and How?

  1. What is electrical ground?
  2. Reasons for grounding
  3. Signal ground, signal return
  4. Ground grid technique
  5. Isolated grounding technique
  6. Ground loop noise reduction

III. Signal Ground Techniques

  1. Ground each current only once
  2. Unsafe signal grounding
  3. Single point versus ground grid
  4. Signal isolation techniques

IV. How to Diagnose Noise Problems

  1. Ringing, rounding, and reflections
  2. Effects of signal impedance distribution on susceptibility
  3. Practical diagnostic techniques
  4. Noise coupling examples

V. Noise Reduction Techniques

  1. Filtering and shielding
  2. Reducing mutual inductance

VI. Filtering Conducted Noise

  1. CM and DM filter techniques
  2. Improving circuit balance
  3. 1 GHZ filtering techniques
  4. DC power bus design

VII. Inductive and Capacitive Shielding

  1. Self-shielding techniques
  2. Misuse of twisted pair
  3. Grounding cable shields
  4. Shielding examples

VIII. Reducing Electromagnetic Coupling

  1. Identifying EM coupling
  2. Controlling CM currents

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

  • Presentasi
  • Diskusi antar peserta
  • Studi kasus
  • Simulasi
  • Evaluasi
  • Konsultasi dengan instruktur

Jadwal pusattraining.com tahun 2021 :

9 – 11 Februari 2021

30 Maret – 1 April 2021

2 – 4 Juni 2021

6 – 8 Juli 2021

4 – 6 Agustus 2021

31 Agustus – 2 September 2021

13 – 15 Oktober 2021

2 – 4 November 2021

30 November – 2 Desember 2021

21 – 23 Desember 2021

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan pusattraining.com :

  • Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2021 ini :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di pusat training untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Transportasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running

About the author

pusattra310 administrator

Leave a Reply

Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Marketing

Gigih

Online

Marketing

Veri Mujianto

Online

Gigih

Hai, tanyakan pada kami ? 00.00

Veri Mujianto

Hai, tanyakan pada kami ? 00.00