Pelatihan Industrial Hydraulics
Training Stage 2 Industrial Hydraulics
Pelatihan Industrial Hydraulics
Entry Requirements Pelatihan Industrial Hydraulics
Candidates must have attended the Stage 1 Hydraulics training course and know:
• The basic principles that underpin all hydraulic systems and relationships between pressure, flow, torque and speed.
• How to read and interpret circuit diagrams using current symbols.
• The function and operation of pressure relief valves, sequence valves and pressure reducing valves and have a basic appreciation of component setting up procedures.
• The principle of pressure compensation relating to flow control.
• The principle of operation of check valves and sliding spool valves.
• The operation of gear, vane and piston pumps, and have a basic appreciation of pump testing.
• The different characteristics of oils and the aspects of contamination control.
• The principle of operation of accumulators.
• The basic principles of proportional control and be aware of the electrical interface that now exists with hydraulic systems.
Course Aims Pelatihan Industrial Hydraulics
The course is designed to raise the knowledge and understanding at a more advanced level ensuing a greater effectiveness in the workplace relating to technical decision making and management of systems.
On completion of this course candidates will:
• Know the various pump control systems in current use.
• Know the importance of manufacturers’ data and following correct installation, commissioning and test procedures.
• Know the importance of effective maintenance techniques.
• Know the procedures to follow to effectively manage fluid power systems.
• Know the cause of failure in hydraulic systems and the logical process involved in fault diagnostics.
• Know the function and operation of a greater range of components.
• Know the requirements of health and safety linked to risk management.
Course Outline Pelatihan Industrial Hydraulics
Pumps and associated control systems covering both fixed and variable displacement involving:
1. Relief valves, Un-loader valves and principle, Pressure compensation (constant pressure), Load sensing, Constant power, Open and closed circuit applications.
2. Installation and Commissioning procedures.
3. Causes of pump failure (preventative measures).
4. Health and performance monitoring.
Control Valves involving pressure, flow and direction:
1. Valve sizing and performance (spool and poppet).
2. Logic cartridge elements.
3. Proportional control.
4. Load holding and motion control (cylinder and motor applications).
5. Priority flow control and rotary flow dividers.
Hydraulic motor performance:
1. Fixed and variable displacement controls.
Logical troubleshooting techniques:
1. Practical hydraulics.
Peserta
Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.
Instruktur
Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.
Metode Training
- Presentasi
- Diskusi antar peserta
- Studi kasus
- Simulasi
- Evaluasi
- Konsultasi dengan instruktur
Jadwal pusattraining.com tahun 2023 :
- Batch 1 : 24 – 26 Januari 2023
- Batch 2 : 14 – 16 Februari 2023
- Batch 3 : 20 – 23 Maret 2023
- Batch 4 : 4 – 6 April 2023
- Batch 5 : 15 – 17 Mei 2023
- Batch 6 : 26 – 28 Juni 2023
- Batch 7 : 17 – 19 Juli 2023
- Batch 8 : 14 – 16 Agustus 2023
- Batch 9 : 25 – 27 September 2023
- Batch 10 : 10 – 12 Oktober 2023
Batch 11 : 7 – 9 November 2023
Batch 12 : 5 – 7 Desember 2023
- Batch 11 : 7 – 9 November 2023
- Batch 12 : 5 – 7 Desember 2023
Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan pusattraining.com :
- Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
- Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
- Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
- Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
- Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
Investasi Pelatihan tahun 2023 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di pusat training untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Transportasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.
Technorati Tags: training production optimization of oil & gas pasti jalan,training optimalisasi produksi migas pasti jalan,training pengenalan production of oil & gas pasti jalan,training gas well loading prediction pasti jalan,pelatihan production optimization of oil & gas pasti jalan,pelatihan optimalisasi produksi migas pasti running