Category Archive Sistem

Bypusattra310

PELATIHAN ELECTRICAL SAFETY

ELECTRICAL SAFETY TRAINING 

PELATIHAN ELECTRICAL SAFETY

training ELECTRICAL SAFETY,pelatihan ELECTRICAL SAFETY,training ELECTRICAL SAFETY Batam,training ELECTRICAL SAFETY Bandung,training ELECTRICAL SAFETY Jakarta,training ELECTRICAL SAFETY Jogja,training ELECTRICAL SAFETY Malang,training ELECTRICAL SAFETY Surabaya,training ELECTRICAL SAFETY Bali,training ELECTRICAL SAFETY Lombok,pelatihan ELECTRICAL SAFETY Batam,pelatihan ELECTRICAL SAFETY Bandung,pelatihan ELECTRICAL SAFETY Jakarta,pelatihan ELECTRICAL SAFETY Jogja,pelatihan ELECTRICAL SAFETY Malang,pelatihan ELECTRICAL SAFETY Surabaya,pelatihan ELECTRICAL SAFETY Bali,pelatihan ELECTRICAL SAFETY Lombok

DESCRIPTION PELATIHAN ELECTRICAL SAFETY

Electrical safety training starts with your’s company’s commitment to your well being. Our Electrical safety training course is designed to train your electrical staff on the proper care, maintenance, inspection and utilization of the electrical systems in industrial, commerical and institutional locations. It is also designed to ensure that arc flash program delegates are instructed to work within the guidelines of current Federal (CSA), provincial, Electrical Utility Safety Association (EUSA) and OSHA (Canada) safety regulations. Our arc flash protection program will help employees and companies reduce the risk of personal injury and equipment damage due to operator error. The course is also designed to ensure that, under emergency conditions, the proper steps are taken to restore power in an efficient and safe manner. Arc Flash Protection.Understand the hazards of electricity at the power system supply level. Material includes the review of electrical blast, electrocution, short circuits, overloads, ground faults, fires, lifting and pinching injuries. Important Definitions. Review the principles, governmental regulations, work practices and specialized equipment relating to personal protection. A documented safe practice system is now required by OSHA 29CFR1910 Subpart R and Subpart S, which will be covered in this course. Personal Protective Equipment. Develop a familiarity with the different types of “Personal Protective Equipment” through demonstrations of locking and tagging devices, protective clothing and specialized equipment. Isolation and Lockout Practices. Learn proper procedures for the lockout and isolation of electrical equipment and compare them to existing site regulations and policies.

OUTLINE PELATIHAN ELECTRICAL SAFETY

1. Safety Policies, Codes and Procedures For Electrical Power Systems

2. Electrical Safety for Industrial Facilities.

This course meets OSHA mandated training requirements under 29 CFR 1910.332 for safety-related work practices and 29 CFR 1910.269 for medium-voltage distribution systems.OSHA mandated personal protection requirements:

· OSHA 29 CFR 1910.303

  • OSHA 29 CFR 1910.331-.335
  • OSHA 29 CFR 1910.137
  • OSHA 29 CFR 1910.269
  • OSHA 29 CFR 1910.147

Electrical safety training students will learn the OSHA mandated special precautionary techniques and the use of electrical protective equipment. The course will also cover the use of arc protective equipment, insulated hand tools, and protective and substation grounding. Each student receives a copy of the course text that includes the OSHA regulations.

3. Power System Hazards

4. Power System Faults

Facts and Figures:

  • Major Causes: Act of God, Human or Operator Error, Equipment Breakdown
  • Short Circuits
  • Overloads
  • Fires
  • Electrocution
  • Important Definitions

5. Personal Protective Equipment

  • Introduction
  • Personal Body Protective Equipment
  • Testingand Grounding
  • Live Line Tools

6. Temporary Grounding

  • Introduction
  • Purpose
  • Work Methods

7. Hazards of Isolated Equipment

  • Induction
  • Accidental Energization
  • Wind
  • Lightning
  • Grounding Equipment for Overhead Lines – General
  • Adequate Capacitance Clamps
  • Adequate Capacity Cables
  • Overhead Grounding Sets
  • Installation of Temporary Grounds

8. Potential Indicating Devices

  • Introducton
  • Purpose
  • Potential Indicators:
    • Volt Meters
    • Clip-on Ammeter
    • Clip-on Watt Meter
    • Phase Rotator
    • Preparation of Temporary Grounding

9. Isolation and Switching Procedures

    • Introduction
    • Self-Protection
    • Red Tag

Work Protection Guarantees

Work Permit

Work and Test Permit

Station Guarantee

10. Switching Practices

11. Lockout Procedures

    • Individual Lockout
    • Lock Box Method
    • Sign In Method
    • Removal of a Personal Safety Lock

Safe Limits of Approach: Authorized Person

Safe Limits of Approach: Competent Person

12. Safe Operation and Maintenance Procedures Electrical Power Systems

Safety Practices and Equipment Review

Safety Equipment Review

Safety Practices Review

Lockout policies vs. procedures

Importance of accurate drawings

Commissioning vs. Maintenance Safety Guidelines

Transformer Operation and Maintenance Safety

Maintenance Testing Safety practices

Oil sampling, Tapchangers, Testing

Switchgear Operation and Maintenance Safety

Grounding Practices and Principals

Safety in Maintenance Testing

Operating HV and MV Breakers and Switches

Electrical System Safety

Control systems, CTs and PTs

Capacitors and Reactors

Power Cables

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

  • Presentasi
  • Diskusi antar peserta
  • Studi kasus
  • Simulasi
  • Evaluasi
  • Konsultasi dengan instruktur

Jadwal Pelatihan di Pusat Training Indonesia :

15 – 17 Januari 2019
12 – 14 Februari 2019
12 – 14 Maret 2019
9 – 11 April 2019
7 – 9 Mei 2019
18 – 20 Juni 2019
9 – 11 Juli 2019
6 – 8 Agustus 2019
3 – 5 September 2019
24 – 26 September 2019
8 – 10 Oktober 2019
22 – 24 Oktober 2019
5 – 7  November 2019
3 – 5  Desember 2019
hal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan Pusat Training Indonesia :

Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2019 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call).

*Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Pusat Training Indonesia :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan .
Module / Handout
FREE Flashdisk
Sertifikat
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

 

Bypusattra310

Pelatihan Electrical Testing and Commissioning of Electric Power Systems

Training Electrical Testing and Commissioning of Electric Power Systems

Pelatihan  Electric Power Systems

training  Electric Power Systems,pelatihan  Electric Power Systems,training  Electric Power Systems Batam,training  Electric Power Systems Bandung,training  Electric Power Systems Jakarta,training  Electric Power Systems Jogja,training  Electric Power Systems Malang,training  Electric Power Systems Surabaya,training  Electric Power Systems Bali,training  Electric Power Systems Lombok,pelatihan  Electric Power Systems Batam,pelatihan  Electric Power Systems Bandung,pelatihan  Electric Power Systems Jakarta,pelatihan  Electric Power Systems Jogja,pelatihan  Electric Power Systems Malang,pelatihan  Electric Power Systems Surabaya,pelatihan  Electric Power Systems Bali,pelatihan  Electric Power Systems Lombok

Description Electrical Testing and Commissioning of Electric Power Systems Training

The electrical acceptance testing and commissioning of electric power systems is essential to the start up of any electrical system for the first time, regardless of its size, type or industry. It is a very special occurrence and poses some unique challenges to electrical personnel. Inexperience and poor planning will inevitably result in prolonged delays in the start up which can lead to costly productivity losses. This course provides invaluable information to anyone who wishes to know and understand the role of Electrical Acceptance Testing, Commissioning and Start-up of Electrical Power Distribution Systems. The importance of planning and preparation for the project, from engineering to commissioning and start up, will be emphasized. This course deals with safety considerations and testing and start-up procedures for all the components of any electrical system. The course leader will also offer useful guidelines on what to do when things go wrong during this phase of a project.

Course Outline Pelatihan Electrical Testing and Commissioning of Electric Power Systems

  1. Course Introduction
    Instructors introduction and background
    Management of commissioning projects
    About NETA
    Certification of Test Technicians
    Certification Test Examples
    NETA – ANSI Standards
    NETA – Frequency of Tests
    Overview – ATS 1999
  2. Electrical Theory
    Basic Electrical Theory & Commonly Used Formulae
    Time-Current Characteristics
    Electrical Definitions and Acronyms
    Ground Fault Systems
    Coordination studies
    Short Circuit Studies
    Device Evaluations
  3. Understanding Electrical Drawings
    IEEE Device numbers
    Drawing Symbols
    Single lines drawings
    3 line drawings
    AC/DC Trip & Control Schematics
    Wiring Diagrams
    General System Design, Lay-out and Drawings
  4. Component Testing Procedures
    Types of Commonly Used Test Equipment
    Insulation Resistance Testing
    Contact resistance Testing
    Current Injections, CT testing
  5. Safety
    Construction Site Considerations
    Safety during a start up project
    Temporary generators and construction power
    Personal Protective Equipment Voltage Detection Equipment, Hot-sticks, Grounds
    Temporary Grounds
    Qualified Electrical Personnel
  6. Documentation
    Management of Start Up & Commissioning Projects
    Turnover Packages
    Drawing control, field mark ups and “as builts”
    Test sheet document control
    Keeping track of completed tasks
    Deficiency tracking
  7. System Commissioning
    Ensuring the system is working completely
    Using electrical drawings
    Sensing Devices
    Isolating devices
    Relays and tripping devices
  8. NETA Acceptance Testing Specifications
    NETA Acceptance testing procedures of Electrical Equipment
  9. Substation Equipment Commissioning
    Ground Grid Design, Grounding (Step & Touch Potentials, Earth Resistivity, Bonding Resistance)
    Testing ground grids and soil resistivity
    High voltage towers and switches
    Outdoor SF6 Breakers
    Other Substation Equipment
    NETA Recommended Component tests
  10. Transformer Commissioning
    General Construction, Operation & Safety
    Field Assembly and Vacuum Filling of Power Transformers
    Handling Transformer Oil, Tapchangers
    Transformer Protective Devices, Bushings, auxiliary devices alarms & trips
    NETA Recommended ELectrical Acceptance Testing and Commissioning Tests
  11. Distribution Switchgear Commissioning
    General Construction, Operation & Safety
    Metal Clad Switchgear construction and safety features
    Commissioning Switchgear
    Breaker construction and safety features
    Capacitors
    Current Transformers
    Instrument Transformers, Test switches, Metering and Relaying Devices
    NETA Recommended Acceptance Tests
  12. Plant Start Up
    Pre-energization checklists
    First energization proceedures
    Phase rotation and other measured system parameters

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

  • Presentasi
  • Diskusi antar peserta
  • Studi kasus
  • Simulasi
  • Evaluasi
  • Konsultasi dengan instruktur

Jadwal Pelatihan di Pusat Training Indonesia :

15 – 17 Januari 2019
12 – 14 Februari 2019
12 – 14 Maret 2019
9 – 11 April 2019
7 – 9 Mei 2019
18 – 20 Juni 2019
9 – 11 Juli 2019
6 – 8 Agustus 2019
3 – 5 September 2019
24 – 26 September 2019
8 – 10 Oktober 2019
22 – 24 Oktober 2019
5 – 7  November 2019
3 – 5  Desember 2019
hal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan Pusat Training Indonesia :

Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2019 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call).

*Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Pusat Training Indonesia :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan .
Module / Handout
FREE Flashdisk
Sertifikat
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

 

Bypusattra310

PELATIHAN TRAINING NEED ANALYSIS

TRAINING NEED ANALYSIS (TNA)

PELATIHAN TRAINING NEED ANALYSIS

training PELATIHAN TRAINING NEED ANALYSIS,pelatihan PELATIHAN TRAINING NEED ANALYSIS,training PELATIHAN TRAINING NEED ANALYSIS Batam,training PELATIHAN TRAINING NEED ANALYSIS Bandung,training PELATIHAN TRAINING NEED ANALYSIS Jakarta,training PELATIHAN TRAINING NEED ANALYSIS Jogja,training PELATIHAN TRAINING NEED ANALYSIS Malang,training PELATIHAN TRAINING NEED ANALYSIS Surabaya,training PELATIHAN TRAINING NEED ANALYSIS Bali,training PELATIHAN TRAINING NEED ANALYSIS Lombok,pelatihan PELATIHAN TRAINING NEED ANALYSIS Batam,pelatihan PELATIHAN TRAINING NEED ANALYSIS Bandung,pelatihan PELATIHAN TRAINING NEED ANALYSIS Jakarta,pelatihan PELATIHAN TRAINING NEED ANALYSIS Jogja,pelatihan PELATIHAN TRAINING NEED ANALYSIS Malang,pelatihan PELATIHAN TRAINING NEED ANALYSIS Surabaya,pelatihan PELATIHAN TRAINING NEED ANALYSIS Bali,pelatihan PELATIHAN TRAINING NEED ANALYSIS Lombok

DESKRIPSI PELATIHAN TRAINING DESIGN

Penyusunan program training tahunan adalah pekerjaan yang rutin dilakukan oleh bagian diklat dan SDM. Tidaklah mudah untuk menentukan kebutuhan training apa yang harus dipenuhi dalam agenda kedepan. Banyak faktor yang mempengeruhi penyusunan program training tahunan ini. Begitu juga cara yang bisa dilakukan dalam penyusunan program training tahunan ini.

Penyusunan program training tahunan bukanlah milik perusahaan yang besar dan mampu saja. Namun semua perusahaan dari kecil hingga kelas menengahpun dapat menyusun program training yang berkualitas.
Pada pelatihan ini para peserta akan mengetahui faktor-faktor yang ada di dalam perusahaan seperti minat pimpinan perusahaan, kemampuan, keberadaan sumber daya manusia, serta melihat kompetensi apa yang telah tersedia dapat digunakan untuk menyusun program training tahunan dengan mengawalinya menyusun TNA (Training Need Analysis).

MATERI PELATIHAN TRAINING DESIGN

training PELATIHAN TRAINING NEED ANALYSIS,pelatihan PELATIHAN TRAINING NEED ANALYSIS,training PELATIHAN TRAINING NEED ANALYSIS Batam,training PELATIHAN TRAINING NEED ANALYSIS Bandung,training PELATIHAN TRAINING NEED ANALYSIS Jakarta,training PELATIHAN TRAINING NEED ANALYSIS Jogja,training PELATIHAN TRAINING NEED ANALYSIS Malang,training PELATIHAN TRAINING NEED ANALYSIS Surabaya,training PELATIHAN TRAINING NEED ANALYSIS Bali,training PELATIHAN TRAINING NEED ANALYSIS Lombok,pelatihan PELATIHAN TRAINING NEED ANALYSIS Batam,pelatihan PELATIHAN TRAINING NEED ANALYSIS Bandung,pelatihan PELATIHAN TRAINING NEED ANALYSIS Jakarta,pelatihan PELATIHAN TRAINING NEED ANALYSIS Jogja,pelatihan PELATIHAN TRAINING NEED ANALYSIS Malang,pelatihan PELATIHAN TRAINING NEED ANALYSIS Surabaya,pelatihan PELATIHAN TRAINING NEED ANALYSIS Bali,pelatihan PELATIHAN TRAINING NEED ANALYSIS Lombok

Hari 1 :
•    Introduction
•    Macam dan tujuan training yang akan disusun
•    Manfaat training bagi perusahaan maupun karyawan
•    On the job training, orientation program, mutasi, promosi
Hari 2 :
•    Pertimbangan faktor internal
•    Resources yang digunakan sebagai dasar pertimbangan
•    Proses penyusunan TNA sebagai dasar penyusunan program training
Hari 3 :
•    Proses penyusunan program training tahunan
•    Bagaimana menyatukan persepsi di antara para Pimpinan Departemen tentang kebutuhan training
•    Penyusunan budget training
Hari 4 :
•    Bagaimana proses mengevaluasi peserta
•    Bagaimana membuat laporan kompetensi karyawan secara sederhana sebagai bahan penyusunan TNA
•    Bagaimana bentuk formulir-formulir yang praktis namun mudah digunakan

c

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

  • Presentasi
  • Diskusi antar peserta
  • Studi kasus
  • Simulasi
  • Evaluasi
  • Konsultasi dengan instruktur

Jadwal Pelatihan di Pusat Training Indonesia :

15 – 17 Januari 2019
12 – 14 Februari 2019
12 – 14 Maret 2019
9 – 11 April 2019
7 – 9 Mei 2019
18 – 20 Juni 2019
9 – 11 Juli 2019
6 – 8 Agustus 2019
3 – 5 September 2019
24 – 26 September 2019
8 – 10 Oktober 2019
22 – 24 Oktober 2019
5 – 7  November 2019
3 – 5  Desember 2019
hal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan Pusat Training Indonesia :

Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2019 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call).

*Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Pusat Training Indonesia :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan .
Module / Handout
FREE Flashdisk
Sertifikat
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive

 

Bypusattra310

Pelatihan Electronic Data & Filling System

[block]0[/block] Electronic Data & Filling System

Electronic Data & Filling System

Deskripsi Pelatihan Electronic Data & Filling System

Salah satu point penting dalam kegiatan perkantoran yaitu pengelolaan arsip dokumen dan data dengan baik. Pengelolaan arsip dokumen dan data yang kurang tepat akan mengakibatkan inefisiensi dalam pekerjaan, baik waktu maupun biaya. Dukungan teknologi modern saat ini memudahkan pengelolaan dan penyimpanan arsip dokumen dan data dari manual ke bentuk digital, ataupun secara teknis dalam pengelolaannya. Training ini akan memberikan pemahaman, ketrampilan dan teknik-teknik dalam pengelolaan arsip dokumen dan data dengan menggunakan system elektronik.

 

Tujuan Pelatihan

Setelah mengikuti training ini, diharapkan peserta dapat:

Mmahami pentingnya Standard Operation Procedure (SOP) dalam pengelolaan dan penyimpanan asip dokumen dan data secara elektronik;
Melakukan pengelolaan dan penyimpanan arsip dokumen dan data secara elektronik dengan tepat;

Materi Electronic Data & Filling System Training

Konsep modern office
Konsep office automation
Pengelolaan dan Penyimpanan Arsip dokumen dan Data
SOP dalam Pengelolaan dan Penyimpanan Arsip dokumen dan Data
Sistim Arsip Dan Pengelolaan Arsip Secara Electronik
Media Penyimpanan Arsip dokumen dan data
Electronic Filling System
Study kasus dan diskusi
Peserta

Training ini diperuntukkan bagi:

Sekretaris Senior & Yunior
Executive Secretary
Kepala Kantor
Personal Assistant
Staf Administrasi
Staf kantor dari semua divisi
Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode Training

  • Presentasi
  • Diskusi antar peserta
  • Studi kasus
  • Simulasi
  • Evaluasi
  • Konsultasi dengan instruktur

Jadwal Pelatihan di Pusat Training Indonesia :

  • 15 – 17 Januari 2019
  • 12 – 14 Februari 2019
  • 12 – 14 Maret 2019
  • 9 – 11 April 2019
  • 7 – 9 Mei 2019
  • 18 – 20 Juni 2019
  • 9 – 11 Juli 2019
  • 6 – 8 Agustus 2019
  • 3 – 5 September 2019
  • 24 – 26 September 2019
  • 8 – 10 Oktober 2019
  • 22 – 24 Oktober 2019
  • 5 – 7  November 2019
  • 3 – 5  Desember 2019

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Biaya dan Lokasi Pelatihan Pusat Training Indonesia :

  • Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan tahun 2019 ini :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call).

*Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Pusat Training Indonesia :

FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
FREE Akomodasi Peserta ke tempat pelatihan .
Module / Handout
FREE Flashdisk
Sertifikat
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive